Home » Injector Dynamics ID2600-XDS Fuel Injectors for Nissan GT-R (R35) (Set of 6)
User 1
Only 5 left in stock

Important emissions notice This product is not identified as CARB exempt. Verify legality for your specific vehicle and location before purchasing or installing. Parts that bypass, defeat, or render emissions controls inoperative must not be used on pollution-controlled vehicles. A “competition use only” label does not by itself make a prohibited defeat device legal under federal law. California street applications generally require a valid CARB Executive Order for the specific part and vehicle.
Injector Dynamics

Injector Dynamics ID2600-XDS Fuel Injectors for Nissan GT-R (R35) (Set of 6)

SKU: IDX2600.48.14.R35.6
$2,390.85
Product details

The Injector Dynamics ID2600-XDS is the highest-flowing injector in the current Injector Dynamics lineup — the largest port injector Injector Dynamics lists for the R35 platform. This set of six, manufacturer part number 2600.48.14.R35.6, is the configuration Injector Dynamics lists for the Nissan GT-R (R35) and its VR38DETT twin-turbo V6, supplied with 14 mm grey adapter tops and GT-R lower spacers in Injector Dynamics' application-specific R35 configuration.

Specifications

  • Nominal flow rate: 2600 cc/min at 3.0 bar (43.5 psi)
  • Maximum differential fuel pressure: 9.0 bar (130.5 psi); Injector Dynamics specifies a minimum 11-volt supply
  • Body length: 48 mm
  • Top: 14 mm grey adapter top
  • Bottom: GT-R lower spacer
  • Injection architecture: port fuel injection (PFI)
  • Electrical: high impedance; USCAR connector; new mating connector supplied by Injector Dynamics
  • Fuel compatibility per Injector Dynamics: methanol, ethanol, and all known hydrocarbon fuels; NOT compatible with ethers (MTBE, ETBE, TAME) or nitromethane

Fitment

Listed by Injector Dynamics under part number 2600.48.14.R35.6 for the Nissan GT-R (R35). Verify compatibility using manufacturer part number 2600.48.14.R35.6 before ordering.

Quantity

Sold as a set of six (6) injectors.

Installation & Calibration

Professional installation and an application-appropriate ECU calibration using Injector Dynamics characterization data are required. The ID2600-XDS is high impedance; confirm the specified minimum 11-volt supply and use Injector Dynamics' published characterization data for the engine-management platform.

Check applicable federal, state, and local emissions regulations before installing this part on a street-driven vehicle.