Home » Injector Dynamics ID1300-XDS Fuel Injectors for Hellcat, Trackhawk & Demon (Set of 8)
Photo - Primary
Photo - Primary
Photo - Primary
Photo - Primary
27 in stock

Important emissions notice This product is not identified as CARB exempt. Verify legality for your specific vehicle and location before purchasing or installing. Parts that bypass, defeat, or render emissions controls inoperative must not be used on pollution-controlled vehicles. A “competition use only” label does not by itself make a prohibited defeat device legal under federal law. California street applications generally require a valid CARB Executive Order for the specific part and vehicle.
Injector Dynamics

Injector Dynamics ID1300-XDS Fuel Injectors for Hellcat, Trackhawk & Demon (Set of 8)

SKU: IDX1300.48.14.14.8
$2,079.00
Product details

The Injector Dynamics ID1300-XDS is a high-flow fuel injector developed in partnership with Bosch Motorsport, built with corrosion-resistant stainless internals and designed around alternative fuels. This set of eight, manufacturer part number 1300.48.14.14.8, is the configuration Injector Dynamics lists for Dodge Hellcat, Dodge Demon, and Jeep Trackhawk applications on the supercharged 6.2L HEMI platform.

Specifications

  • Nominal flow rate: 1335 cc/min at 3.0 bar (43.5 psi), rated with iso-octane at 52°C (125°F)
  • Maximum differential fuel pressure: 7.0 bar (101.5 psi)
  • Injector length: 48 mm
  • Upper O-ring: 14 mm (grey top adapter)
  • Lower O-ring: 14 mm
  • Injection architecture: port fuel injection (PFI)
  • Electrical: high impedance; USCAR connector; new mating connector supplied by Injector Dynamics
  • Fuel compatibility: compatible with all known fuels per Injector Dynamics, including ethanol blends such as E85

Fitment

Listed by Injector Dynamics under part number 1300.48.14.14.8 for Hellcat, Trackhawk, and Demon applications. Verify compatibility using manufacturer part number 1300.48.14.14.8 before ordering.

Quantity

Sold as a set of eight (8) injectors.

Installation & Calibration

Professional installation and an application-appropriate ECU calibration using Injector Dynamics characterization data are required.

Check applicable federal, state, and local emissions regulations before installing this part on a street-driven vehicle.