Home » Injector Dynamics ID1300-XDS Fuel Injectors for Nissan GT-R (R35) (Set of 6)
Photo - Primary
Photo - Primary
Photo - Primary
Photo - Primary
19 in stock

Important emissions notice This product is not identified as CARB exempt. Verify legality for your specific vehicle and location before purchasing or installing. Parts that bypass, defeat, or render emissions controls inoperative must not be used on pollution-controlled vehicles. A “competition use only” label does not by itself make a prohibited defeat device legal under federal law. California street applications generally require a valid CARB Executive Order for the specific part and vehicle.
Injector Dynamics

Injector Dynamics ID1300-XDS Fuel Injectors for Nissan GT-R (R35) (Set of 6)

SKU: IDX1300.48.14.R35.6
$1,559.25
Product details

The Injector Dynamics ID1300-XDS is a high-flow injector developed in partnership with Bosch Motorsport, built with corrosion-resistant stainless internals and designed around alternative fuels. This set of six, manufacturer part number 1300.48.14.R35.6, is the configuration Injector Dynamics lists for the Nissan GT-R (R35) and its VR38DETT twin-turbo V6, supplied with 14 mm grey adapter tops and GT-R lower spacers in Injector Dynamics' application-specific R35 configuration.

Specifications

  • Nominal flow rate: 1335 cc/min at 3.0 bar (43.5 psi), rated with iso-octane at 52°C (125°F)
  • Maximum differential fuel pressure: 7.0 bar (101.5 psi)
  • Body length: 48 mm
  • Top: 14 mm grey adapter top
  • Bottom: GT-R lower spacer with 14 mm O-ring
  • Injection architecture: port fuel injection (PFI)
  • Electrical: high impedance; USCAR connector; new mating connector supplied by Injector Dynamics
  • Fuel compatibility per Injector Dynamics: all known fuels, including ethanol blends such as E85

Fitment

Listed by Injector Dynamics under part number 1300.48.14.R35.6 for the Nissan GT-R (R35) factory-rail location. Verify compatibility using manufacturer part number 1300.48.14.R35.6 before ordering.

Quantity

Sold as a set of six (6) injectors.

Installation & Calibration

Professional installation and an application-appropriate ECU calibration using Injector Dynamics characterization data are required.

Check applicable federal, state, and local emissions regulations before installing this part on a street-driven vehicle.